HP FlexFabric 534FLB - network adapter

  • Insight # 0002488704
  • Mfr. #

    700742-B21

  • UNSPSC: 43201503
£11.99  ex VAT
£14.39  inc VAT
Ordered upon Request

Quantity
- +

Product Description

The HP FlexFabric 10Gb 2-port 534FLB adapter features the next generation of 10Gb Ethernet offering in a single chip solution on a FlexibleLOM form factor, further reducing power requirements for 2 ports of 10Gb Ethernet. It is designed for use with HP BladeSystem c-Class Gen8 servers. It provides full duplex high performance Ethernet connectivity with support for HP Virtual Connect FlexFabric blade interconnect technology, allowing each 10GbE port to be divided into four physical NICs and optimize bandwidth management for virtualized servers. The HP 534FLB FlexFabric network adapter, in conjunction with HP Virtual Connect FlexFabric technology, helps to extend the benefits of virtualization beyond the server and into the rest of the infrastructure. The HP 530FLB supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames and PXE boot. It also supports virtualization features such as SR-IOV (Windows, Linux, VMWare), VMware NetQueue and Microsoft VMQ.

Specification

Product Description HP FlexFabric 534FLB - network adapter
Device Type Network adapter
Form Factor Plug-in card
Interface (Bus) Type PCI Express 2.0 x8
PCI Specification Revision PCIe 2.0
Ports 10Gb Ethernet x 2
Data Link Protocol 10 GigE
Data Transfer Rate 10 Gbps
Processor 1 x BCM57810S - Broadcom
RAM 900 MB
Compliant Standards IEEE 802.3, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.3ae, IEEE 802.3p, IEEE 802.1ab (LLDP), IEEE 802.3ap, IEEE 802.1Qau
System Requirements SunSoft Solaris 10, Microsoft Windows Server 2008 SP2, Red Hat Enterprise Linux Server, Red Hat Enterprise Linux 6.1, Red Hat Enterprise Linux 5.7, Citrix XenServer 6.0, Microsoft Windows Server 2008 R2 SP1 (32/64 bits), VMware vSphere 5.0, VMware vSphere 4.1
Pricing Type Factory integrated
Designed For ProLiant BL420c Gen8, BL460c Gen8, BL660c Gen8, WS460c Gen8, WS460c Gen8 Graphics Expansion


Extended Specification

General
Device Type Network adapter
Form Factor Plug-in card
Interface (Bus) Type PCI Express 2.0 x8
PCI Specification Revision PCIe 2.0
Compatibility Information
Designed For HP ProLiant BL420c Gen8, BL460c Gen8, BL660c Gen8, WS460c Gen8, WS460c Gen8 Graphics Expansion
Environmental Parameters
Humidity Range Operating 10 - 90% (non-condensing)
Max Operating Temperature 55 °C
Min Operating Temperature 0 °C
Expansion / Connectivity
Interfaces 2 x 10Gb Ethernet
Miscellaneous
Compliant Standards FCC Class A certified, UL, BSMI CNS 13438 Class A, EN55022 Class A, WEEE, RoHS, FCC Part 15 A, AS/NZS, VCCI V-3 Class A ITE, EN 61000-3-2:2006, EN 61000-3-3:2008, ICES-003 issue 4 Class A, KN24, KN22 Class A, EN55024:1998 + A1 + A2
Pricing Type Factory integrated
Networking
Compliant Standards IEEE 802.3, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.3ae, IEEE 802.3p, IEEE 802.1ab (LLDP), IEEE 802.3ap, IEEE 802.1Qau
Connectivity Technology Wired
Data Link Protocol 10 GigE
Data Transfer Rate 10 Gbps
Features TCP/IP offloading, Quality of Service (QoS), Jumbo Frames support, PXE support, Single Root I/O Virtualization (SR-IOV), tagged VLAN, TCP Offload Engine (TOE)
Ports 10Gb Ethernet x 2
Processor / Memory
Processor 1 x BCM57810S - Broadcom
RAM 900 MB
Software / System Requirements
OS Required SunSoft Solaris 10, Microsoft Windows Server 2008 SP2, Red Hat Enterprise Linux Server, Red Hat Enterprise Linux 6.1, Red Hat Enterprise Linux 5.7, Citrix XenServer 6.0, Microsoft Windows Server 2008 R2 SP1 (32/64 bits), VMware vSphere 5.0, VMware vSphere 4.1

Find Similar

If this product isn't exactly what you were looking for you can find similar products by simply selecting the features you are looking for below and clicking the find button.

Find Similar