APC Switched Rack PDU 2G Zero Upower distribution unit

£749.99  ex VAT
£899.99  inc VAT

Stock

14 available
Device Type: Power distribution unit - rack-mountable
Weight: 7.64 kg
Localisation: Japan, Canada, United States
Input Voltage: AC 200/208/230 V

Need help ordering?
Call 0844 846 3333

  • Insight #: 0001719396
  • Mfr. #:

    AP8941

  • UNSPSC: 43201618

Overview

Product Description

Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing, and outlet use management.

APC by Schneider Electric Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. New AP8000 series Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers.

User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by Schneider Electric's StruxureWare solution.

Network Management - Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Remote Management Capabilities - Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Alarm Thresholds - Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities.).

Local Current Monitoring Display - The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only).

Power Delays - Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.

Load Indicator LED - Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

Flash Upgradeable - Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only).

Specification

APC Switched Rack PDU 2G Zero U - power distribution unit
Device Type Power distribution unit - rack-mountable
Weight 7.64 kg
Localisation Japan, Canada, United States
Input Voltage AC 200/208/230 V
Output Voltage AC 200/208 V
Input Connectors 1 x power NEMA L6-30
Output connectors 3 x power IEC 60320 C19 ¦ 21 x power IEC 60320 C13
Networking Ethernet, RS-232, USB
Remote Management Protocol SNMP, Telnet, HTTP
Dimensions (WxDxH) 5.6 cm x 4.6 cm x 182.9 cm
Manufacturer Warranty 2 years warranty
Designed For P/N: AR3100


Extended Specification

General
Colour Black
Device Type Power distribution unit - rack-mountable
Localisation Japan, Canada, United States
Compatibility Information
Designed For P/N: AR3100
Dimensions & Weight
Depth 4.6 cm
Height 182.9 cm
Weight 7.64 kg
Width 5.6 cm
Dimensions & Weight (Shipping)
Shipping Depth 12.4 cm
Shipping Height 204 cm
Shipping Weight 10 kg
Shipping Width 16.5 cm
Environmental Parameters
Humidity Range Operating 5 - 95%
Max Operating Temperature 45 °C
Min Operating Temperature -5 °C
Expansion / Connectivity
Interfaces 1 x management (Ethernet) - RJ-45 ¦ 1 x management (RS-232) ¦ 1 x management (USB)
Manufacturer Warranty
Service & Support Limited warranty - 2 years
Miscellaneous
Cables Included Power cable - external - 3.05 m ¦ Serial cable - external
Compliant Standards UL, cUL, ICES-003, VCCI Class A ITE, RoHS, FCC Part 15 A, PSE Mark, REACH
Features LCD display, current meter, LED indicators, overload protection
Rack Mounting Kit Included
Networking
Remote Management Interface Ethernet, RS-232, USB
Remote Management Protocol SNMP, Telnet, HTTP
Power Device
Frequency Required 50/60 Hz
Input Connectors 1 x power NEMA L6-30
Input Voltage AC 200/208/230 V
Max Electric Current 30 A
Output Voltage AC 200/208 V
Power Output Connectors Details 3 x power IEC 60320 C19 ¦ 21 x power IEC 60320 C13

Customer Licence Information

Program Name:

Enrolment Number:

Master Agreement Number:

Expiration Date:

View Contracts

Find Similar

If this product isn't exactly what you were looking for you can find similar products by simply selecting the features you are looking for below and clicking the find button.

Find Similar